| The first part (wood articles) One, serving wood Head 1, head size Serve
wood club head is growing, the current limit of 460CC. This year, the
vast majority of clubs have been close to or reached this limit. Head
the greater the tolerance value will also rise, but accompanied by a
greater torque to the club face is not easy to back positive and so on.
For this reason, manufacturers use smaller torque shaft to fix this
problem, also makes extensive use of the OEM shaft by an independent
shaft of plants as standard equipment. Optional head size is not much,
only a few companies, such as smaller size of the Miura, Tom Wishon
high-end or custom manufacturer before production, and the rest are
basically done the maximum allowed by the current rule. Visually
acceptable, slightly larger head no harm, but remember to consider the
shaft torque, conditional would be best to replace the shaft as an
independent brand, can be more stable. 2, club face angle Common
serve wood club face angle from 8.5 to 12 degrees (HT), in 2009, Tom
Wishon directory of 15.5 degrees of ultra-high trajectory ball wood.
Serve wood club face angle in order to meet the user's swing
characteristics and ballistic characteristics. In order to select the
number one wood face angle, golfers need to understand the
characteristics of his swing. When hitting a ball, the angle formed
between the head forward line with the target line is called the angle
of attack. By the upward angle of attack, a level playing 0 angle of
attack, there is a negative angle of attack on self. The judgment of the
way, if your number one wooden swing hit the sweet spot of the outgoing
angle below the angle of the club logo, then you swing a certain
negative angle of attack, and vice versa. Negative angle of attack
in order to have the right of the trajectory of golfers to choose the
larger clubs of the club face angle, the positive angle of attack of
golfers according to their needs to choose a different club face angle
to optimize their driving distance. Many golfers may not know your
own swing will produce what kind of angle of attack. Here we will
slightly simplify some. If the kick-off distance of more than half of
over 260 yards, more appropriate to select the Face of about 9 degrees,
otherwise select the clubface about 10 degrees is more appropriate. 3, the rod height There
are two common serve wood surface, shallow face and deep face. Serve
wood in order to ensure high MOI values, usually the head to do
relatively flat, face relatively shallow. For most golfers, tee wood
deviate from the sweet spot of the main lever toe of the club and pole
with two directions, so a shallow clubface is more appropriate. If your
number one wood is often the dozen or rod crown hit the club (club
along), it is best to choose a club face is relatively high (deep face)
products. Shaft For the original club, the shaft of choice
is a single, independent shaft manufacturers a wide variety of products,
makes it easy for you seeing things. One thing is certain, regardless
of the original shaft which brand OEM shaft, the brand of the same
retail model is necessarily better than the original use of the
performance is better. This is the industry's "open secret" Needless to
say, in essence, a cost issue. If conditional, must bring the original
shaft replaced for your independent brand shaft, you will get greater
stability, longer distances and more optimized take-off trajectory. The
shaft performance for the inflection point, the weight and torque. High
discount points to produce a low trajectory, low break point to produce
high trajectory. The higher the weight, the higher relative stability,
but the impact of the swing speed. Torque is lower, the club is more
stable, especially in non-sweet spot to hit it. Select the shaft when
they pay attention to select the appropriate shaft hardness. 1, shaft hardness The
choice of the first principles of the shaft hardness is - choose the
softest clubs that you can control in order to maximize the distance.
For example, if your swing speed is just at the junction of R and S,
then the best choice for R shaft. Of course, if the pursuit of absolute
control on the distance does not matter, you can take a ceiling, select
S. The speed of the swing tempo affect the performance of the shaft, if
you swing fast-paced, then to choose the relatively stiffer shaft. If
your swing tempo is slower, then you also need to choose softer. The
domestic market of the male shaft hardness select for the R and S. U.S.
regulations and sundial. In general, the clubs of the sundial in the
circumstances identified by the same hardness than the regulation of
soft America. If you swing slower pace, you can choose the sundial R
shaft. Otherwise, consider the S-. If the United States regulatory club
swing speed below 105MPH, select R on it. New TAYLOR MADE R7 limited
U.S. regulatory products, products for Asian hardness logo M, swing
speed is generally slow swing tempo, you should select the hardness of M
products. 2, torque Shaft torque can be simply understood
as the torsional capacity of the shaft. With the increased size of the
club, ball instantly, head to the shaft torque is applied is also
growing. Therefore, manufacturers have begun to select the torque and
smaller products. However, the original shaft torque and stability still
can not be compared with the independent brand shaft. Preferred choice,
the torque of the smaller product. The smaller the torque when the
deviation from the sweet spot of your racket, the shaft torsional less
crooked ball is not so much, and vice versa. 3, the weight Wood
shaft weight is roughly in 5x, 6x, 7x, 8x g interval. Theoretically
speaking, the lighter the shaft, lets play the quicker it, so now, many
Japanese club shaft is 50 grams, lady rod in this range, and even
lighter. Light shaft allows the user to have a faster swing speed, but
it can also lead to a swing instability. Generally speaking, 6x grams
serve wood body is the lower limit of the men chose the shaft weight.
Below this weight, and cost factors affect the performance of the
manufacturers of ultra-light shaft will decline. To improve stability,
it is recommended that the swing speed in the 90-100MPH men 6X g shaft,
and over 100MPH the golfers should choose 7X g products. Do not worry
about the weight shaft will affect your swing speed, 10 g weight on
swing speed is minimal. 4, the shaft turning point Shaft
turning point is roughly divided into low, medium or high. The turning
point bending maximum point when the club by force. High discount points
to produce a low trajectory, low break point to produce high
trajectory. The trajectory of the folding point will have some impact in
the choice of shaft to make a choice according to their take-off
trajectory, or to listen to the advice of professionals. 5, the club length The
last point is the length of the club. Suitable height of between
170-180 persons, under normal circumstances serve Wood length 43 inch to
44.5 inch. PGA TOUR players average height is 5 feet 11 inches (180
cm), serving wood and they use mostly 44 or 44.5 inches. 45 inches from
the general length of the commercial club, this length is too long for
most golfers. The length is too long will lead to a poor swing
stability, batting quality will also be affected, thereby affecting the
direction and distance of the ball. The purchase of the commercial club,
it is best to immediately truncated to the appropriate length,
including the Fairway. Many golfers think that the short clubs change
will swing speed impact, which is right. From the physics point of view,
the swing speed is really slow, but just slow down a little bit. But
the shorter the club can make it easier for you to hit the sweet spot,
and easier to control the club. So often you get more distance. Callaway FT-iZ Drivers Callaway RAZR FIT Drivers Callaway RAZR X Black Irons |
