Backup backup (this method is the most commonly used, I will detail)
As a generic available for Windows XP backup program, MS Backup (ntbackup.exe) to back up the entire disk drive, and more importantly, even if the registry file is open and being used in, MS Backup can back up the registry, Ye That is when the COPY, XCOPY, and implementation of the operation can not copy, MS Backup can copy the registry.
1, first open the Click Select the folder C: Winnnt System32 Config or check inside a single file is valid, but backup your registry Shique No matter. MS Backup allows you to check them, but they will not back up Even if the system state backup, does not include user-specified registry file form: NTUSER.DAT and USERCLASS.DAT files, so you want to backup all the registry files, but also will check them and these documents may stored in C: Documents and Setting or C: WinntWrofile folder.
2, in the left window, select + sign, select the Documents and Setting folder check box next to.
4, select tab, select card, select the br> 8, click the ; the check box. If you choose to backup your content will increase (you only back up the registry in case).
9, click box, then click Other media
this method the process is relatively simple, just select the backup tree, System State, you can use Backup to back up or the Welcome tab on the Automated System Recovery Wizard. using a selected ASR (Automated System Recovery, Automated System Recovery), Navigator will create three backup sets, you just based on the wizard to complete.
Third, use the copy or xcopy backup
registry in Windows XP is being used when it is not the copy back the current registry, so use copy or xcopy to repair the registry, you must shut down Windows XP and start another, such as DOS, Windows 98/Me class operating system, or a second Windows XP. (I suggest you use dual system, the multi-system configuration see In the% SystemRoot% Repair directory to find a backup copy of your registry to another
2, and then use xcopy to copy% SystemRoot% System32 Config directory of all current registry files using the / c option xcopy can ignore the error (this is necessary because the current registry is being used, otherwise an error).
four backup methods when using FAT FAT file system
using Windows XP users through the use of / sys option to format the floppy disk, you can easily start DOS or Windows 98/Me (if using FAT32). then displays the DOS command prompt, you can easily read the hard disk To create a FAT-compatible and can be boot floppy, just use Windows 98/Me or DOS FORMAT command with the / s option to the system and then put those on xcopy (xcopy *.*) are also copied to the floppy diskette you can use this in Windows XP start the machine, and free access to the computer on all FAT formatted drive in the boot to complete the command prompt, put those registry files to a safe location on just a very simple task,Coach Purses, can be copied to another hard disk on one floppy, ZIP disk or other support on CD-R/CD-RW disc media.
five backup using NTFS (not recommended)
already on NTFS has a very detailed description the. NTFS files on the drive, only by Windows XP to write, and other operating systems can not. In order to be able to access the registry file on NTFS, you must install a second Windows XP.
six, use RegEdit to the basket were
registry using the Registry Editor (RegEdit), by double-clicking a small icon to create another backup to restore the registry if you run a simple main steps, you can create in addition to Security and SAM registry keys other than the contents of all registry backup using the following techniques can be backed up RegEdit Security and SAM registry keys:
1, run RegEdit.
2, now you can see My Coputer is highlighted.
3, select the Registry menu in the Export Registry file option.
4, find the Desktop and enter a name for this file, then click the Save button.
5, exit RegEdit.
Windows XP provided in RegEdit version of the registry files as Unicode format output.
to note is that your backup files in a safe place, which is especially important.
Reply With Quote
REC - F22
View Public Profile Send a private message to
REC - F22
to REC - F22 Send Email
Find REC - F22 all posts
# 4
old 06-06 -02, 04:29
REC - F22 REC - F22 is offline
WIN Corps agents captain [B-01107-TL]
green soldiers, Major
Join Date: 2005-03 -16
Location: Nanning
Posts: 829
REC - F22 is on a distinguished road
Windows XP registry recovery
order to restore the registry, you must consider you are how to save the registry. Let me talk about the five commonly used methods:
one, as long as boot Windows XP, then you can use MS Backup to restore the registry.
1, first open the Programs / Accessories / System Tools Select the tab, select When finished, press ; Start Restore In the dialog box, click files to a tape or other machine or even a place offline The registry file backup program and then will return to its original position. This method is very simple.
1,Coach Op Art, restore from tape
When you use compatible with Windows XP backup and recovery procedures to ensure that the choice is to restore the local registry, but also the only judge to restore the damaged registry files or other files to be restored.
2, from the Backup supported by the other media recovery
using Windows XP Backup program to back up the list from the list to select the System State restore. System State contains three elements: the boot files, COM + class registration and registry (Note: not partially restored the System State data, it can only be fully recovered) you include in addition to the ASR backup System State includes in addition to other documents, you can restore as needed when Active Directory is running, it can not restore the System State In most backup and recovery procedures are the main differences between the user interface and media compatibility. Do not forget, usually a variety of tape backup tape can only be used to create this same procedure for recovery work.
Third, from a copy of the registry to restore
You can copy the registry, create identical copies of the file with the registry, then you can then copy them to the original position. This method requires you to use a second operation system (multi-system configuration, see steps from the basket were created to restore the registry:
1, starts another operating system, the FAT with Windows XP / NT, DOS or Windows 98/Me: The use of NTFS Windows XP / NT. < br> 2,coach outlet, fundamental not only to prevent registry problems, save the current registry to a safe location.
3, copy the saved registry registry to the current position.
4, start in doubt Windows XP version, and test and observation is made to restore normal operation and if not, please read on.
Fourth, the use Setup to restore
Windows XP's Backup program can save the registry to% SystemRoot% Repair of the directory, you can use Windows XP, the next Backup program to restore the files from the Repair directory and ASR disk to restore the correct system registry to run the Windows XP Backup program. When Setup starts, it checks the hard disk and the bad Find the Windows XP system has been installed and their Repair directory once the check is complete, Setup will give some options, including press F2 to run the ASR. If you can not run ASR, Windows XP's Setup program will give you three Choose:
1, now install Windows XP, press Enter.
2, use Recovery Console repair Windows XP, press the R key.
3, termination and exit to install Windows XP Setup, press F3.
Press R to select the repair option, then enter the repair mode and continue to the next screen does not display four options are normally selected by default,Coach Crossbody, you can select. The next Setup for device testing, display information that is being tested equipment, the screen below the status display will show the process once the registry update is complete, Setup program prompts you to take the floppy disk boot device and restart the computer if everything is normal, the computer will start and normal operation.
five loads a. reg file
You can use the RegEdit registry saved with a. reg extension of the text file. Windows XP know this is a registry file if the file browser or desktop, double-click the file, it will automatically load this file into the registry in the state of the command prompt, enter the command start filename.reg, where filename is the registry basket copies of the file name. attention is to confirm editor used to support Unicode, Notepad WordPad can work well if you can not start or run Windows, you can not use this method
work to repair the registry, you must restart Windows XP (Windows XP In the majority of run-time cache contents of the registry) and only restarted after many changes in the registry was only to reload.
Reply With Quote
REC - F22
View Public Profile
Send a private message to REC - F22
to REC - F22 Send Email
Find REC - F22 all posts
# 5
Old 06-06-06, 19:12
fall a tree fall a tree is offline
soldier Lieutenant Colonel senior member of the Green

Join Date: 2004-11-24
Location: Central
Post: 371
fall of a tree is on a distinguished road
how such a good post and no one will top it?
for the novice, this tutorial rare!
never left the sky under any trace
but I have flown
Reply With Quote
fall of a tree
View Public Profile Send a private message to

fall of a tree a tree to fall Send Email
fall of a tree to find all posts
# 6
Old 06-06-07, 15:18
stone20000 stone20000 is offline
green soldier Corporal Corporal
< br> Join Date: 2006-05-10
Location: hai meiyou
Posts: 20
stone20000 is on a distinguished road
as well, it is not that good, huh, huh, the registry is I do not understand something,Coach Handbags, to learn, the opportunity to see the future maintenance of the registry can become a master
Reply With Quote
stone20000
View Public Profile Send a private message to stone20000

search stone20000 all posts
# 7
Old 06-06-17, 06:24
REC - F22 REC - F22 is offline
WIN Corps agents captain [B-01107- TL]
green soldiers, Major
Join Date: 2005-03-16
Location: Nanning
Posts: 829
REC - F22 is on a distinguished road
use registration to strengthen the Network Neighborhood
table every time the user with information sharing within the network transmission, the If you want to network with friends in more efficient and more securely share transfer, it must find ways to tap the , specially set up starting from the registry, to strengthen the to a nearby computer icon, double-click the icon to a nearby computer can access shared resources. If you do not want the Network Neighborhood icon on the computer near the window includes the words, in accordance with the following method to hide it:
click Start CurrentVersion Policies Explorer registry subkey, right in the key should be sub-area of ??the window, check whether there is a file called Right-click a blank area of ??the right window, and then from the pop-up menu, click br> The following double-click the left mouse button and then just create a good , and restart the computer system, so that when you re-open the My Network Places window, you will not see that there is > By default, the Network Neighborhood window the same way the local computer's icon will show up when you double-click the icon to the local system can access shared information. If you want to share information not allowed by the local LAN other users access to, you can use the following approach to the local computer icon disappears from the Network Neighborhood window:
Click the command if not found, then, may wish to right-click the Parameters key, right from the pop-up menu, click will not see the shadow of the local computer!
hidden traces of a recent visit
If you are using Windows 2000 operating system or above the 2000 version of the system, you will find the Network Neighborhood window, if the system has intelligent memory skills, it automatically put some of your recent visit to the name of all the shared folders show up, even those who shared folder sharing status has been canceled, others will see from the My Network Places window that share the name. In order to effectively protect the shared access to your privacy, you can try the following steps to share access to the most recent signs of hidden:
Click enter the string command Check whether there is All traces of some shared access from the My Network Places window hidden.
If you are using Windows 9X operating system, then one by one to start the registry branch HKEY_CURRENT_USER Network Recent, and then the corresponding key below the Recent, You will find all the traces of shared access, then you just select them in turn and perform a delete command, respectively, in My Network Places window will be able to access all the traces of all cleaned up.
hidden Network Neighborhood map
My Network Places window to access shared resources, in addition to the direct use of the mouse double-click the shared folder icon to view the contents, but you can also right-click a target shared folder, and from the pop-up menu implementation of , you need to hide the Network Neighborhood mapping function, the following is a specific method of hidden:
Click ; regedit side of the window area to see if can find the Network Neighborhood window, icon you can easily access to all types of LAN workstations from a security point of view if you want other people can not browse My Network Places window to all the workstations in the local area, may wish to follow set procedures, to the whole Network icon from the Network Neighborhood window hidden:
Click interface;
one by one in the interface to start the registry branch HKEY_CURRENT_USER Software Microsoft Windows CurrentVersion Policies Network (Figure 5),Coach Kristin, corresponding to the key in the Network sub-region in the right window to see if contains The key to the new name is set to neighbors window hidden.
hidden system share documents
In Windows XP operating system is installed the computer, go to the My Network Places window interface can always be found in Double-click the folder you can see some of the local share information. If you do not want others to see the local share private time